1/4 Federzugwerk mit Echappement (5 stein).

Westminsterschlag auf 5-Stabgong (Unterschläger) 120mm. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger AEL 04 - vor gewundenen Version..
• Zifferblatt: Kieninger 155mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern und eine Nachahmung Messing Felge.
• Gongs: 5-Stabgong - 120mm für AEL & APL.
• Montage: Vorne / hinten - Teil der Bewegung
• Plan: Kieninger Bewegung Einbauzeichnung noch nicht verfügbar.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The AEL movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The AEL movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.

This movement set is suitable for a mantle or small wall clocks - it requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.

For your convenience we can supply the Dial, Hands and Movement assembled as a unit - the AEL 04 has two chrome plated brackets that can be front or rear mounted on the movement and these are used for attaching the movement to your clock cabinet.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Federzugwerk mit Echappement (5 stein).

1/2- Stundenschlag Bim-Bam auf Glocke 50mm, hintenliegend oder am Gehäuse. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger LEG 01
• Zifferblatt: Oakside Antique White Card dial 195mm square with a round printed face 126mm diameter.
• Gongs: Einzigen Messing Glocke, oben montiert
• Montage: Uhrwerk Befestigungsschrauben und Platten
• Plan: Kieninger Bewegung Einbauzeichnung noch nicht verfügbar.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The LEG 01 movement specifications. Plate size 100mm x 85mm x 1.7mm with 4 bronze bushes. 5-jewel Swiss Escapement, Chime silencing, front Winding through the Dial. The movement chimes the hours with a single chime on the half-hour on a single 50mm brass bell.

This movement set is suitable for mantle or small wall clocks. It requires a minimum measurement of 108mm from the front of the hand-shaft to the inside of the rear panel.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Federzug-Umschaltwerk mit Echappement (5 stein).

3 Melodian (Westminster, Whittington & St. Michael) auf 8-Stabgong 120mm/140mm.

This highly polished movement is ideal for Bracket or Mantle clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger J 0212 hochglanzpolierten Version
• Zifferblatt: Kieninger 155mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern und eine Nachahmung Messing Felge.
• Gongs: Acht-Stabgong
• Montage: Einfache Montage, rückwärtig befestigt, Uhrwerk Haltebügel
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The J 0212 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, a Swiss escapement, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial but it is available to order with Rear winding.

This movement is suitable for mantle or small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Federzug-Umschaltwerk mit Echappement (5 stein).

3 Melodian (Westminster, Whittington & St. Michael) auf 8-Stabgong 120mm/140mm.

Montagebausatz für Gong 120/140mm

This highly polished movement is ideal for Bracket or Mantle clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger J 0212 Base mounting.
• Zifferblatt: Kieninger 155mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern und eine Nachahmung Messing Felge.
• Gongs: Eight rod gong..
• Montage: Base mounting fixing screws..
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The J 0212 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, a Swiss escapement, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial but it is available to order with Rear winding.

This Special Base mounting version of the J movement is highly polished and it includes a polished 8-rod brass gong assembly and matching polished brass legs. It is suitable for mantle or small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Federzug-Umschaltwerk mit Echappement (5 stein).

3 Melodian (Westminster, Whittington & St. Michael) auf 8-Stabgong 120mm/140mm.

Montagebausatz für Gong 120/140mm

This highly polished movement is ideal for Bracket or Mantle clocks. (besondere Bestellung)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: J 0221C
• Zifferblatt: Kieninger Multi-function Calendar Dial 125mm diameter
• Gongs: Base mounting fixing screws..
• Montage: Base mounting fixing screws..
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that this superb movement and dial will be delivered fully assembled and ready for installation into your clock cabinet.

The J 0221 movement specifications. Plate size 100mm x 104mm x 2.0mm with six bronze bushes, a chronometer Swiss escapement, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. This movement winds through the dial.

This Special Base mounting version of the J movement is highly polished and it includes a polished 8-rod brass gong assembly and matching polished brass legs. It is suitable for mantle or small wall clocks. It requires a minimum distance of 107mm from the front of the hand-shaft to the rear panel. When you place an order, we will provide a Kieninger drawing that gives all installation dimensions.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Federzug-Umschaltwerk mit Echappement (5 stein). 3 Melodian (Westminster, Whittington and St Michael) auf 9 polierte Glockenspiel.

Ideal for large Bracket or Mantle clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger REC - Triple Melodie, hochglanzpoliert.
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Gongs: Nest von neun Glocken für KSU55, RWU & REC poliert.
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The REC Mantle clock movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 - bronze bushings. The movement plays three melodies on a nest of 9 - nested brass bells. There are two radial selectors on the Special Moon Phase dial and these control the three melodies and the chimes - You can select Automatic Night Silencing (silent between 10PM & 7-15 AM), Continuous Chiming or Silent. This movement set requires a minimum measurement of 184mm from the inside face of the dial glass to the inside of the rear panel.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Federzug-Umschaltwerk mit Echappement (5 stein). 3 Melodian (Westminster, Whittington and St Michael) auf 9 polierte Glockenspiel.

Ideal for large Bracket or Mantle clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger REC - Mozart Version, hochglanzpoliert.
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Gongs: Nest von neun Glocken für KSU55, RWU & REC poliert.
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The REC Mozart Mantle movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 - bronze bushings. The movement plays three melodies on a nest of 9 - nested brass bells. There are two radial selectors on the Special Moon Phase dial and these control the three melodies and the chimes - You can select Automatic Night Silencing (silent between 10PM & 7-15 AM), Continuous Chiming or Silent. This movement set requires a minimum measurement of 184mm from the inside face of the dial glass to the inside of the rear panel.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Federzug-Umschaltwerk. PL 15cm.

3 Melodian (Westminster, Whittington and St Michael) auf 9 Glockenspiel.

Ideal for large Bracket or Mantle clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger RWU 03 - 15cm mit neun verschachtelten Glocken. Sehr begrenzte Anzahl verfügbar Oakside.
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 15cm Pendel mit einem 50 mm Messing Pendelscheibe
• Gongs: Nest von neun Glocken für KSU55, RWU & REC satiniert.
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RWU Mantle movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 - bronze bushings. The movement plays three melodies on a nest of 9 - nested brass bells. There are two radial selectors on the Special Moon Phase dial and these control the three melodies and the chimes - You can select Automatic Night Silencing (silent between 10PM & 7-15 AM), Continuous Chiming or Silent. This movement set requires a minimum measurement of 184mm from the inside face of the dial glass to the inside of the rear panel.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Laufwerk mit Seilzug. PL 43cm.

High Precision miniature jewelled movement without chimes.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger NS 001 - 43cm Specialist Uhrwerk.
• Zifferblatt: Kieninger 150mm diameter white Dial with black Arabic numerals, a subsidiary seconds dial and a brass rim..
• Pendel: Kieninger 43cm Pendel mit einem 80 mm Messing Pendelscheibe
• Polierte Schalen: Einzigen Messinghülle nur 35mm Durchmesser und 91mm lang
• Gewichte: Besondere Blei 0.95kg
• Montage: Teil der Bewegung
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The NS movements have four turned pillars protruding from the rear plate - these are used to attach the movement to the rear panel of the clock - the method by which all high quality regulator movements are mounted as it reduces the risk of the movement oscillating in sympathy with the pendulum.

The superior specification of this movement allows it to runs for eight days using a very small single brass 115gram in weight and only 35mm diameter and 110mm long.

Technical data. Brass main plates 81mm high and 70mm wide. plates 1.7mm thick. Total depth from handshaft to rear panel is only 64mm. There are 8 rubies and 6 bronze bushings reducing the friction on the arbors, a Graham Dead-Beat lever escapement provides the pulses to drive the pendulum and a friction device provides automatic beat adjustment, There is a secondary drive called maintaining power - this keeps the pendulum and second hand advancing correctly during the rewinding period. The NS also has seconds indication.

On the NS 43cm version, the measurement from the hand-shaft to the centre of the 80mm diameter bob is 315mm. For the NS 54cm version, the measurement is 425mm. The distance from the hand-shaft to the bottom of the cabinet needs to be a minimum of 420mm to accheive eight-day running.

Please note that this is a specialized movement and to achieve optimum running it should only be used in a stable, high Quality cabinet.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Laufwerk mit Seilzug. PL 54cm.

High Precision miniature jewelled movement without chimes.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger NS 003 - 54cm Specialist Uhrwerk.
• Zifferblatt: Kieninger 150mm diameter white Dial with black Arabic numerals, a subsidiary seconds dial and a brass rim..
• Montage: Teil der Bewegung
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The NS movements have four turned pillars protruding from the rear plate - these are used to attach the movement to the rear panel of the clock - the method by which all high quality regulator movements are mounted as it reduces the risk of the movement oscillating in sympathy with the pendulum.

The superior specification of this movement allows it to runs for eight days using a very small single brass 115gram in weight and only 35mm diameter and 110mm long.

Technical data. Brass main plates 81mm high and 70mm wide. plates 1.7mm thick. Total depth from handshaft to rear panel is only 64mm. There are 8 rubies and 6 bronze bushings reducing the friction on the arbors, a Graham Dead-Beat lever escapement provides the pulses to drive the pendulum and a friction device provides automatic beat adjustment, There is a secondary drive called maintaining power - this keeps the pendulum and second hand advancing correctly during the rewinding period. The NS also has seconds indication.

On the NS 43cm version, the measurement from the hand-shaft to the centre of the 80mm diameter bob is 315mm. For the NS 54cm version, the measurement is 425mm. The distance from the hand-shaft to the bottom of the cabinet needs to be a minimum of 420mm to accheive eight-day running.

Please note that this is a specialized movement and to achieve optimum running it should only be used in a stable, high Quality cabinet.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Federzugwerk PL 43cm.

Westminsterschlag auf 5-Stabgong (Unterschläger) 120mm. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger APL 05 - 43cm
• Zifferblatt: Kieninger 155mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern und eine Nachahmung Messing Felge.
• Pendel: Kieninger 43cm Pendel mit einem 80 mm Messing Pendelscheibe
• Gongs: 5-Stabgong - 120mm für AEL & APL.
• Montage: Inbegriffen.
• Plan: Kieninger Bewegung Einbauzeichnung noch nicht verfügbar.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The APL 05 movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.

This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.

The APL 05 is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the baswe of you cabinet using the screws provided.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Federzugwerk PL 54cm.

Westminsterschlag auf 5-Stabgong (Unterschläger) 120mm. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger APL 05 - 54cm
• Pendel: Kieninger 54cm Pendel mit einem 80 mm Messing Pendelscheibe
• Plan: Kieninger Bewegung Einbauzeichnung noch nicht verfügbar.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The APL 07 movement specifications. Plate size 100mm x 104mm x 1.7mm with six bronze bushes, a patented Kieniramic7 Dead Beat Graham escapement, an automatic tick (beat) adjustment mechanism, a chime control lever with three selectable positions, providing the choice of Automatic Night Silencing (between 10pm & 07-15AM), continuous chiming and silent. The APL 05 movement plays the Westminster melody, chimes the hours and strikes on the half hour on a 5-rod gong.

This movement set requires a minimum measurement of 102mm from the inside face of the dial glass to the inside of the rear panel.

When using the standard metal rod penduum (106) and 80mm bob the distance from the hand-shaft to the centre of the bob is 395mm and the total swing is 145mm.

The APL 07 is fixed to the rear panel of your cabinet using the four hexagon brass pillars supplied with the set. The gong assembly screws to the base of you cabinet using the screws provided.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Seilzugwerk. PL 65cm.

1/2-Stundenschlag auf Rundgong- Tonfeder. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger LSR 02 - 65cm.
• Zifferblatt: 200mm Square Zifferblatt mit schwarzen römischen Ziffern und warf Zierecken
• Pendel: Kieninger 65cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: Zwei - Blei 3.1kg
• Gongs: Spule Gong 160mm mit Eisen Halterung für PS Uhrwerke.
• Montage: Uhrwerk Klemmschrauben vorgesehen.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The LSR 02 movement specifications. Plate size 100mm x 85mm x 1.7mm with 4 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, Chime silencing and front Winding through the Dial. The movement chimes the hours and strikes a single chime on the half hour on coil gong.

This movement set requires a minimum measurement of 108mm from the front of the hand-shaft to the inside of the rear panel, the pendulum with a 140mm diameter bob swings approximately 190mm. To achieve eight-day running the weights drop 730mm measured from the hand-shaft to the bottom of the case.

The Dial, Hands and Movement are supplied assembled and ready for mounting on your support board - you need to drill three holes in the rear board using the template provided and the chimes can be easily mounted using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Seilzugwerk. PL 65cm.

1/2-Stundenschlag auf Rundgong- Tonfeder.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger PS 055 - 65cm.
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 65cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: Zwei - Blei 3.1kg, 50mm x 160mm lang
• Gongs: Spule Gong 160mm mit Eisen Halterung für PS Uhrwerke.
• Montage: PS Uhrwerk, Messing Halterung mit Spezialschrauben.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 114mm x 99mm x 2.0mm. A dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 055 movement chimes the hours and strikes on the half-hour on a coiled gong.

The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet.

The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Seilzugwerk. PL 65cm.

1/2-Stundenschlag auf Rundgong- Tonfeder.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Zifferblatt: Oakside 200mm Durchmesser weiß Regulator-Zifferblatt mit schwarzen römischen Ziffern, zwei Hilfszifferblätter zeigen die Stunden und Sekunden und beendet mit einer Messing-Felge.
• Pendel: Kieninger 65cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: Zwei - Blei 3.1kg, 50mm x 160mm lang
• Gongs: Spule Gong 160mm mit Eisen Halterung für PS Uhrwerke.
• Montage: PS Uhrwerk, Messing Halterung mit Spezialschrauben.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 114mm x 99mm x 2.0mm. A dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 055 movement chimes the hours and strikes on the half-hour on a coiled gong.

The PS 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet.

The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Seil-Federzugwerk. PL 65cm.

Westminsterschlag auf 8-Stabgong 430mm. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger RWS 13 - 65cm.
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 65cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 120mm.
• Gewichte: 2 x 2kg
• Gongs: 8-Stabgong - 430mm für RWS.
• Montage: RWS Uhrwerk Festsetzung / Kabel hängenden Platte.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.

The RWS 13, 65cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 135mm measured from the inside face of the dial glass to the rear panel. To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the hand-shaft to the centre of a 140mm pendulum bob is 532mm and it will swing about 195mm.

The Dial, Hands and Movement can be supplied assembled and we will attach these items to the movement mounting bracket, if it is ordered. We also provide a template so that you can easily drill the seven holes in the rear board and the movement & chimes can be easily installed in your clock using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Seil-Federzug-Umschaltwerk. PL 65cm.

Plays the Westminster, Whittington & St. Michael melodies on the quarters and chimes the hours, on an 8-rod side gong.

Ideal for Wall Clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger SK 012 - 116cm.
• Zifferblatt: Kieninger 180mm Durchmesser weißes Zifferblatt mit schwarzen arabischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 65cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 120mm.
• Gewichte:
• Gongs: Acht-Stabgong, Seite Hämmer
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The SMV 03 movement provides the opportunity of have a triple melody movement in a wall clock! It attaches directly to the back board of your cabinet using te four pillars which are incuded in the set.

The movement description & specifications. Plate size 120mm x 124mm x 1.7mm. 1/4 cable/key wind movement with three melodies - Westminster, St. Michael & Whittington that play on 8-rod 320mm long side hammer gong, automatic beat adjustment & automatic night time shut-off between 10.00 PM and 7.15 AM

The SMV 03, 65cm movement requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 120mm measured from the inside face of the dial glass to the rear panel; To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet. Assume an average pendulum swing 185mm.

The Dial, Hands and Movement are supplied assembled and we will attach these items to the movement mounting bracket if it is ordered.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Seilzugwerk. PL 65cm.

1/2-Stundenschlag auf Rundgong- Tonfeder.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger PS 058 - 72cm
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 72cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: Zwei - Blei 3.1kg, 50mm x 160mm lang
• Gongs: Spule Gong 160mm mit Eisen Halterung für PS Uhrwerke.
• Montage: PS Uhrwerk, Messing Halterung mit Spezialschrauben.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 114mm x 99mm x 2.0mm. Maintaining power, Dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 058 movement chimes the hours and strikes on the half-hour on a coiled gong.

The PS 72cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet.

The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Seilzugwerk. PL 65cm.

1/2-Stundenschlag auf Rundgong- Tonfeder.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger PS 058R - 72cm
• Zifferblatt: Oakside 200mm Durchmesser weiß Regulator-Zifferblatt mit schwarzen römischen Ziffern, zwei Hilfszifferblätter zeigen die Stunden und Sekunden und beendet mit einer Messing-Felge.
• Pendel: Kieninger 72cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: Zwei - Blei 3.1kg, 50mm x 160mm lang
• Gongs: Spule Gong 160mm mit Eisen Halterung für PS Uhrwerke.
• Montage: PS Uhrwerk Festsetzung / Kabel hängenden Platte.
• Montage: PS Uhrwerk, Messing Halterung mit Spezialschrauben.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 114mm x 99mm x 2.0mm. Maintaining power, Dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS 058 movement chimes the hours and strikes on the half-hour on a coiled gong.

The PS 72cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel. The distance from the hand-shaft to the centre of the pendulum bob is 570mm and a 140mm diameter bob will swing about 205mm. To achieve eight-day running the weights need to be able to drop 760mm, measured between the centre of the dial and the inside bottom of the cabinet.

The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Kettenzugwerk. PL 80cm.

1/2-Stundenschlag Bim Bam auf 3-Stabgong 320mm.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger PK 145 - 80cm.
• Zifferblatt: 200mm Square Zifferblatt mit schwarzen römischen Ziffern und warf Zierecken
• Pendel: Kieninger 80cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: 2 x 2kg
• Gongs: Drei-Stabgong Montage, 320mm lang.
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The PK movement specifications. Plate size 114mm x 99mm x 2.0mm with 4 bronze bushes. The patented Kienirramic solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, Automatic Night Silencing. The movement chimes the hours and strikes a single chime on the half hour, on a 3-rod gong.

The movement requires a minimum measurement of 125mm from the inside face of the dial glass to the inside of the rear panel. To achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob the distance from the hand-shaft to the centre of the bob is about 657mm - the swing at the Bob is about 190mm.

The Movement needs to be sat on a 12mm thick mounting board - we will supply a template for marking out the holes for the chain, the gong rods and the movement clamping holes on your mounting board.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Seilzugwerk. PL 80cm.

1/2-Stundenschlag auf Rundgong- Tonfeder.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger PS 037 - 80cm.
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 80cm Brass Gitterpendel mit einem 140mm Messing Pendelscheibe
• Pendel: Kieninger 80cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: Zwei - Blei 3.1kg, 50mm x 160mm lang
• Gongs: Spule Gong 160mm mit Eisen Halterung für PS Uhrwerke.
• Montage: PS Uhrwerk Festsetzung / Kabel hängenden Platte.
• Montage: PS Uhrwerk, Messing Halterung mit Spezialschrauben.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The movement specifications. Plate size 114mm x 99mm x 2.0mm. A dead-beat Graham escapement, Automatic tick (beat) adjustment. A pendant allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The PS movement chimes the hours and strikes on the half-hour on a round gong.

The PS 80cm movement requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 123mm measured from the front of the hand-shaft to the rear panel; To achieve eight-day running the weights need to be able to drop (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet. Assume an average pendulum swing 185mm.

The Dial, Hands and Movement are supplied assembled and we will attach these items to the mounting bracket. We supply a drilling template so that you can easily drill the seven holes in the rear board - the movement set & chimes can then be easily mounted using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Seil-Federzugwerk. PL 80cm.

Westminsterschlag auf 8-Stabgong 430mm. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger RWS 25 - 80cm.
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 80cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 120mm.
• Gewichte: 2 x 2kg
• Gongs: 8-Stabgong - 430mm für RWS.
• Montage: RWS Uhrwerk Festsetzung / Kabel hängenden Platte.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RWS 25 movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.

The RWS 25 - 80cm movement with a 20cm dial requires a clock cabinet internal height of 885mm, a width of 205mm and a depth of 135mm measured from the inside face of the dial glass to the rear panel. To achieve 8-day running, the weights need to be able to drop a minimum distance of 760mm, measured between the centre of the dial and the inside bottom of the cabinet. The distance from the hand-shaft to the centre of a 140mm pendulum bob is 532mm and it will swing about 195mm.

The Dial, Hands and Movement are supplied assembled and we will attach these items to the movement mounting bracket, if it is ordered. We also provide a template so that you can easily drill the seven holes in the rear board and the movement & chimes can be easily installed in your clock using the special bolts included in the set.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Kettenzugwerk. PL 80cm.

1/2-Stundenschlag Bim Bam auf 3-Stabgong 320mm.

Ideal for wall clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: RK 014 - 80cm
• Zifferblatt: Kieninger 250 x 330mm Mond Zifferblatt mit schwarzen römischen Ziffern auf einem silbernen Ring Kapitel. Gegossen Zwickel.
• Pendel: Kieninger 93cm Brass Gitterpendel mit einem 140mm Messing Pendelscheibe
• Polierte Schalen: Drei - 50mm x 245mm.
• Gewichte: Drei - 50mm x 245mm.
• Gongs: 8-Stabgong - 680mm für RK 046.
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The PK movement specifications. Plate size 114mm x 99mm x 2.0mm with 4 bronze bushes. The patented Kienirramic solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, Automatic Night Silencing. The movement chimes the hours and strikes a single chime on the half hour, on a 3-rod gong.

The movement requires a minimum measurement of 125mm from the inside face of the dial glass to the inside of the rear panel. To achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob the distance from the hand-shaft to the centre of the bob is about 657mm - the swing at the Bob is about 190mm.

The Movement needs to be sat on a 12mm thick mounting board - we will supply a template for marking out the holes for the chain, the gong rods and the movement clamping holes on your mounting board.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/2 Kettenzugwerk. PL 80cm.

Chimes the hours and 1/2 hour on a 3-rod side gong.

Ideal for large wall clocks and small floor clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger PK 123 - 93cm.
• Zifferblatt: 200mm Square Zifferblatt mit schwarzen römischen Ziffern und warf Zierecken
• Pendel: Kieninger 93cm Holz Pendel mit einer 140mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: 2 x 2kg
• Gongs: 3-Stabgong - PK
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The PK movement specifications. Plate size 114mm x 99mm x 2.0mm with 4 bronze bushes. The patented Kienirramic solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, Automatic Night Silencing. The movement chimes the hours and strikes a single chime on the half hour, on a 3-rod gong.

The movement requires a minimum measurement of 125mm from the inside face of the dial glass to the inside of the rear panel. To achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob the distance from the hand-shaft to the centre of the bob is about 657mm - the swing at the Bob is about 190mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Seilzug-Umschaltwerk. PL 93cm.

Plays the Westminster, Whittington & St. Michael melodies on a 12- rod gong.

Ideal for Grandmother Clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger KSU 38 - 93cm
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 93cm Brass Gitterpendel mit einem 140mm Messing Pendelscheibe
• Polierte Schalen: Drei - 60mm x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg (4.0 kg schwere Pendel), Melodie 4.0kg.
• Gongs: 12-Stabgong, 680mm - KSU
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 38 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong. This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Kettenzugwerk. PL 93cm.

Plays the Westmister melody on the quarters and chimes the hours on an 8-rod gong.

Ideal for smaller Grandfather Clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger RK 046 - 93cm
• Zifferblatt: Kieninger 250 x 330mm Mond Zifferblatt mit schwarzen römischen Ziffern auf einem silbernen Ring Kapitel. Gegossen Zwickel.
• Pendel: Kieninger 93cm Brass Gitterpendel mit einem 140mm Messing Pendelscheibe
• Polierte Schalen: Drei - 50mm x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg, Melodie 3.0kg.
• Gongs: 8-Stabgong - 680mm für RK 046.
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RK movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, manual Night Silencing. The movement plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

The movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Seilzug-Umschaltwerk. PL 93cm.

Plays the Westminster, Whittington & St. Michael melodies on a 12- rod gong.

Ideal for smaller Grandfather Clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger KSU 36 - 100cm
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 100cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Drei - 60mm x 245mm.
• Gewichte: Glockenspiel 1x 3kg (Eisen), 1 x 5kg (Blei), Melodie 1 x 4kg (Eisen).
• Gongs: 12-Stabgong, 680mm - KSU
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 36 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection of Silent and the three melodies. The Hourly chimes and the melodies are played on a 12-rod gong.

This movement set requires a minimum measurement of 215mm from the front of the hands shaft (inside face of the dial glass) to the inside of the rear panel and to achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet.

As a guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Seilzug-Umschaltwerk. PL 100cm.

Automatic sequencing of the Westminster, Whittington & St. Michael melodies that play on the quarters and chime the hours on a 12-rod gong.

Ideal for floor clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger KSU 52 - 100cm mit automatischer Melodie Sequenzierung.
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 100cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Drei - 50mm x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg (4.0 kg schwere Pendel), Melodie 4.0kg.
• Gongs: 12-Stabgong, 680mm - KSU
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 52, 100cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong.

This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel. The weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the bottom of the cabinet. The timber pendulum with the 140mm Bob has a swing width of 210mm.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

1/4 Seil-Federzugwerk. PL 116cm.

Westminsterschlag auf 8-Stabgong 430mm. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger RWS - 116cm. hochglanzpolierte Version
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Zwei - 50mm x 160mm.
• Gewichte: Inbegriffen.
• Gongs: 8-Stabgong - 430mm für RWS.
• Montage: RWS Uhrwerk Festsetzung / Kabel hängenden Platte.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

Our current stock of RWS 39, 116cm movements have been specially assembled for Oakside by Kieninger. The highly polished movement plates were originally prepared for a company called Sewills who ceased trading a number of years ago. The rear plate has Sewills and 65cm etched on it.

The movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RWS movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.

The RWS 39 116cm movement requires a clock cabinet with a minimum depth of 135mm measured from the inside face of the dial glass to the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzugwerk. PL 116cm.

Plays the Westminster melody on the quarters and chimes the hours, on a nest of five brass bells.

Ideal for a large Laterndluhr style Vienna Regulator. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger RSB - 116cm, hochglanzpoliert Version
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Drei - 50mm x 195mm.
• Gewichte: Streich 3.4kg, Zeit 3.4kg (4.0 kg schwere Pendel), Melodie 3.4kg.
• Gongs: Nest der fünf Glocken für RSB - satiniert.
• Montage: RS & RSB Uhrwerk Festsetzung / Kabel hängenden Platte.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RSB movement specifications. Plate size 131mm x 131mm x 2.0mm. Maintaining Power to keep the clock running during winding, a Kieniramic7 Dead-beat Graham escapement, Automatic tick (beat) adjustment. A lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RSB movement chimes the hours and plays the Westminster melody and chimes the quarters on five nested & polished brass bells.

This movement set requires a minimum measurement of 185mm from the front of the hand-shaft to the inside of the rear panel; the weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzugwerk. PL 116cm.

Plays the Westminster melody on the quarters and chimes the hours, on an 8-rod gong.

Ideal for a large Laterndluhr style Vienna Regulator. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger RS005 - 116 cm. Hochglanzpoliertes Version
• Zifferblatt: Oakside 180mm Durchmesser weißes Zifferblatt mit schwarzen römischen Ziffern, eine Tochtergesellschaft Sekundenzifferblatt und Messing Felge.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Drei - 50mm x 195mm.
• Gewichte: Streich 3.4kg, Zeit 3.4kg (4.5 kg schwere Pendel), Melodie 3.4kg.
• Gongs: 8-Stabgong - 430mm für RWS.
• Montage: RS & RSB Uhrwerk Festsetzung / Kabel hängenden Platte.
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RS 005 movement specifications. Plate size 131mm x 131mm x 2.0mm. A Dead-beat Graham escapement, Power Reserve, Automatic tick (beat) adjustment. Automatic night silencing - a lever allows you to select Automatic Night Silencing (10PM until 7-15AM), Continuous Chiming or Silent. The RS005 movement chimes the hours and plays the Westminster melody on the quarters, on an 8-rod gong.

The Dial, Hands and Movement can be supplied assembled and fixed to a brass support bracket - drill seven holes in the rear board using the template we provide and the movement set & chimes can be easily mounted to the back board of your clock using the special bolts we include in the set.

CABINET DIMENSIONS

The RS005 116cm movement fitted with the Temperature Compensating Pendulum has a distance of 1070mm measured from the centre of the dial to the centre of the pendulum bob and it requires a minimum case width of 285mm to accommodate the 200mm bob.

The RS005 requires a minimum cabinet depth of 135mm measured from the inside face of the dial glass to the rear panel. The weights need to be able to drop a minimum distance of 1210mm, measured between the centre of the dial and the inside bottom of the cabinet.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Kettenzugwerk. PL 116cm.

Plays the Westmister melody on the quarters and chimes the hours on an 8-rod gong.

Ideal for your first self-build Grandfather clock. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger SK 012 - 116cm.
• Zifferblatt: Kieninger 250 x 330mm Mond Zifferblatt mit schwarzen römischen Ziffern auf einem silbernen Ring Kapitel. Gegossen Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 50 x 245mm.
• Gewichte: Streich 2.0kg, Zeit 2.8kg (3.5 kg schwere Pendel), Melodie 3.0kg.
• Gongs: 8-Stabgong - 680mm für SK 012.
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The SK 116cm Pendulum Movement specifications. Plate size 120mm x 124mm x 1.7, 6 bronze bushes, a Kieniramic7 Dead beat Graham escapement, Automatic Tick (beat) adjustment, Control for Silent, Automatic Night silencing 10pm to 7-15am or Continuous chiming. The Hourly chimes and the melodies are played on a 8-rod gong.

This movement set requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 210mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Kettenzugwerk. PL 116cm.

Plays the Westmister melody on the quarters and chimes the hours on an 8-rod gong.

Ideal for smaller Grandfather Clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger RK 047 - 116cm
• Zifferblatt: Kieninger 250 x 330mm Mond Zifferblatt mit schwarzen römischen Ziffern auf einem silbernen Ring Kapitel. Gegossen Zwickel.
• Pendel: Kieninger 116cm Holz Pendel mit einer 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 50 x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg, Melodie 3.0kg.
• Gongs: 8-Stabgong - 680mm für RK 046.
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The RK movement specifications. Plate size 131mm x 131mm x 2.0mm with 6 bronze bushes. the patented Kienirramic& solid anchor Dead Beat Graham escapement, Automatic tick (beat adjustment, manual Night Silencing. The movement plays the Westminster melody on the quarters and chimes the hours on an 8-rod gong.

The movement requires a minimum measurement of 165mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1325 mm, measured between the centre of the dial and the inside bottom of the cabinet. When using the timber pendulum with a 140mm bob, the distance from the hand-shaft to the centre of the bob is 760mm. The swing is about 240mm.

The Movement can be mounted on a ply seat board and the holes for the chains and fixing bolts can be positioned using the template we provide.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzugwerk. PL 116cm.

Plays the Westmister melody on the quarters and chimes the hours on an 8-rod gong.

Ideal for your first self-build Grandfather clock. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger KS 057 - 116 cm. Ideal für Ihre erste Standuhr.
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing römischen Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg (4.0 kg schwere Pendel), Melodie 3.5kg.
• Gongs: 8-Stabgong - 680mm für RK 046.
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KS Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection of Silent and the three melodies. The Hourly chimes and the melodies are played on a 12-rod gong.

This movement requires a minimum measurement of 176mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1280 mm, measured between the centre of the dial and the inside bottom of the cabinet. A timber pendulum with a 165mm bob will swing 260mm.

As a guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Pendulum length 116cm. Chain & Weight Drive.

Plays the Westmister melody on the quarters and chimes the hours on an 8-rod gong.

THIS IS A SPECIAL OFFER SET WITH VERY LIMITED AVAILABILTY - Ideal for your first self-build Grandfather clock. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger MK 003 - 116CM, PL
• Zifferblatt: Kieninger 280 x 395mm Mond Zifferblatt mit schwarzen römischen Ziffern auf einem silbernen Ring und einem Kapitel die Sekunde.
• Pendel: Kieninger 116cm Holz Pendel mit einer 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg (4.0 kg schwere Pendel), Melodie 3.5kg.
• Gongs: 8-Stabgong - 680mm für RK 046.
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The MK Movement specifications. Plate size 141mm x 200mm x 2mm. Manual selection of the Westminster melody, Dead beat Graham escapement, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Hour Chimes and the Melody - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the melody and allows selection of Silent or the Westminster that plays on an 8-rod gong.

This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet.

As a guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzug-Umschaltwerk. PL 93cm.

Plays the Westminster, Whittington & St. Michael melodies that play on the quarters and chime the hours on a 12-rod gong.

Ideal for floor clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger J 1222 - 35cm.
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg (4.0 kg schwere Pendel), Melodie 4.0kg.
• Gongs: 12-Stabgong, 680mm - KSU
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 33 Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, manual selection of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection of Silent and the Westminster, Whittington & St. Michael melodies on a 12-rod gong.

This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet.

As a guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzug-Umschaltwerk. PL 116cm.

Automatic sequencing of the Westminster, Whittington & St. Michael melodies that play on the quarters and chime the hours on nine nested brass bells.

Ideal for floor clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger KSU 50 - 116cm
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg (4.5 kg schwere Pendel), Melodie 5.5kg.
• Gongs: 12-Stabgong, 680mm - KSU
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 50, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or any of the three melodies - The Hourly chimes and the melodies are played on a 12-rod gong.

This movement set requires a minimum measurement of 215mm from the inside face of the dial glass to the inside of the rear panel. The weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the bottom of the cabinet. The timber pendulum with the 140mm Bob has a swing width of 210mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzug-Umschaltwerk. PL 116cm.

Plays the Westminster, Ava Maria & Ode to Joy melodies on the quarters and chime the hours,on a 16-rod gong.

Ideal for Grandfather clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger KSU 63 - 116cm.
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg (5.0 kg schwere Pendel), Melodie 4.0kg.
• Gongs: 16-Stabgong - 680mm für KSU 63
• Montage: Uhrwerk Befestigungsschelle Bars und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU 63, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies Westminster, Birdhunter & Ode to Joy and allows selection Silent, any of the three melodies or Continuous playing - The Hourly chimes and the melodies are played on a 16-rod gong. This movement set requires a minimum measurement of 245mm from the inside face of the dial glass to the inside of the rear panel and the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet. A timber pendulum with a 165mm bob will swing 270mm. A large lyre pendulum with a 270mm bob will swing 355mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzug-Umschaltwerk. PL 116cm.

Automatic sequencing of the Westminster, Whittington & St. Michael melodies that play on the quarters and chime the hours, on nine nested brass bells.

Ideal for Grandfather clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger KSU 55 - 116cm.
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte: Streich 3.0kg, Zeit 3.0kg (4.0 kg schwere Pendel), Melodie 4.0kg.
• Gongs: Nest von neun Glocken für KSU55, RWU & REC satiniert.
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The KSU movement chimes the hours and plays three melodies - Westminster, Whittington & St. Michael on the quarters on a nest of nine polished bells.

The KSU 55, 116cm Pendulum Movement specifications. Plate size 141mm x 200mm x 2.5mm. 6 bronze bushes, Automatic Sequencing of the Westminster, Whittington & St Michaels melodies, Dead beat Graham escapement, Maintaining power, Automatic Tick (beat) adjustment, Maltese cross, cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, Automatic Sequencing or Selection off any off the three melodies

This movement set requires a minimum measurement of 195mm from the front of the hand shaft (inside face of the dial glass) to the inside of the rear panel and to achieve eight-day running, the weights need to be able to drop a minimum distance of 1260mm, measured between the centre of the dial and the inside bottom of the cabinet.

As an approximate guide a pendulum with a 140mm bob will swing 240mm, a 165mm bob swings 250mm, a 200mm bob swings 280mm and a 225mm bob swings 280mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Kettenzugwerk. PL 116cm. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger HS 011 - 116cm
• Zifferblatt: Kieninger 250 x 330mm Mond Zifferblatt mit schwarzen römischen Ziffern auf einem silbernen Ring Kapitel. Gegossen Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte:
• Gongs: 8-Stabgong - 680mm für RK 046.
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The HE 011, 116cm Pendulum Movement specifications. Chain movement with 1/2-hour strike bim-bam on 8-rod gong 680 mm, plate size 150 x 150 x 2,5 mm, 4 bronze bushings (2nd wheels), pallet anchor with stationary escapement (Graham), automatic beat adjustment, strike shut-off,

This movement set requires a minimum measurement of 212mm from the inside face of the dial glass to the inside of the rear panel - the timber pendulum with a 165mm bob swings 255mm, the small Lyre pendulum with a 220mm bob swings 270mm and the weights need to be able to drop a minimum distance of (to be determined) mm, measured between the centre of the dial and the inside bottom of the cabinet.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzug-Umschaltwerk. PL 116cm.

Plays the Westminster, Whittington & St. Michael melodies on the quarters and chimes the hours, on a 12-rod gong.

Ideal for Grandfather clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger HSU 01 - 116 cm. Hochglanzpoliertes Version
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte: Streich 4.0kg, Zeit 5.0kg (6.5 kg schwere Pendel), Melodie 5.0kg.
• Gongs: 12-Stabgong - 680mm für HSU
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The HSU 116cm Pendulum Movement specifications. Plate size 158mm x 230mm x 2.8mm, 24 bronze bushes and 12 genuine Ruby bushes providing the pivots for the motion work, there is a Dead-beat Graham escapement, Automatic Tick (beat) adjustment Westminster, Maintaining power to drive the pendulum during the winding sequence, Automatic beat adjustment to ensure an even tick, Maltese cross cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, individual selection of the three melodies Westminster, Whittington & St Michael or Continuous playing. The Hourly chimes and the melodies are played on a 12-rod gong.

For export orders we offer all our sets with or without the shell fillings - this reduces the shipping weight and there is a also a reduction of the kit price! If you can obtain fillings locally, you will require one filling of 4kg & two of five kg - all with a maximum diameter of 56mm and a maximum length of 245mm. On the options & prices page you will find a large range of alternative Dials & Pendulums.

This movement kit requires a minimum measurement of 215mm from the front of the hand-shaft to the inside face of the rear panel and the weights need to be able to drop a minimum distance of 1615mm, measured between the centre of the dial and the inside bottom of the cabinet. The 270mm bob pendulum needs an cabinet minimum internal swing width of 395mm. A Temperature Compensating Pendulum with a 200mm bob needs a cabinet minimum internal swing width of 350mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!

1/4 Seilzug-Umschaltwerk. PL 116cm. Plays the Westminster, Whittington & St. Michael melodies on the quarters and chimes the hours, on nine full length polished brass tubes.

Ideal for Grandfather clocks. (auf Lager)

Dieses Set kommt standardmäßig mit:

• Uhrwerke: Kieninger HTU 06 - 116cm
• Zifferblatt: Kieninger 280 x 395mm Mondscheibe mit Messing arabische Ziffern auf einem silbernen Ring Kapitel. Geätzte Zwickel.
• Pendel: Kieninger 116cm Lyrapendel mit einem 165mm Messing Pendelscheibe
• Polierte Schalen: Messing poliert Gewicht Schale komplett, 60 x 245mm.
• Gewichte: Streich 4.0kg, Zeit 5.0kg (6.5 kg schwere Pendel), Melodie 5.0kg.
• Gongs: Neun Messing poliert Gong Röhren für HTU
• Montage: Uhrwerk Befestigungsschelle Platte und Schrauben
• Plan: Kieninger Uhrwerk Einbauzeichnung enthalten.

Please note that all dials are supplied fitted to a back plate with four pillars - this connects directly to the front plate of the movement ensuring accurate positioning.

The HTU 116cm Pendulum Movement specifications. Plate size 158mm x 230mm x 2.8mm, 24 bronze bushes and 12 genuine Ruby bushes providing the pivots for the motion work, there is a Dead-beat Graham escapement, Automatic Tick (beat) adjustment Westminster, Maintaining power to drive the pendulum during the winding sequence, Automatic beat adjustment to ensure an even tick, Maltese cross cable winding stops to prevent over-winding, Separate controls for Chimes and he Melodies - The control that protrudes through the left slot in the dial allows selection of - Silent, Automatic Night silencing between 10pm to 7-15am or Continuous chiming. The control that protrudes through the slot on the right side of the dial controls the three melodies and allows selection Silent, individual selection of the three melodies Westminster, Whittington & St Michael or Continuous playing. The Hourly chimes and the melodies are played on nine full length brass tubular bells.

For export orders we offer all our sets with or without the shell fillings - this reduces the shipping weight and there is a also a reduction of the kit price! If you can obtain fillings locally, you will require one filling of 4kg & two of five kg - all with a maximum diameter of 56mm and a maximum length of 245mm. On the options & prices page you will find a large range of alternative Dials & Pendulums.

This movement kit requires a minimum measurement of 215mm from the front of the hand-shaft to the inside face of the rear panel and the weights need to be able to drop a minimum distance of 1615mm, measured between the centre of the dial and the inside bottom of the cabinet. The 270mm bob pendulum needs an cabinet minimum internal swing width of 395mm. A Temperature Compensating Pendulum with a 200mm bob needs a cabinet minimum internal swing width of 350mm.

PLANS - We now offer clock building plans on the Options and Prices page, these can be modified in cabinet depth to accept various Kieninger movements.

Our sets include all of the parts needed to get your clock ticking and Frank will be please to assist with selection, installation & operating questions!